Want more information on:
RICHMOND MACHINE & ENGINEERING
8787 Crawford Rd. Columbus, MI 48063 (586)727-3501 or (586)727-3216(Fax)
| ุ Full-Travel Alphanumeric Keyboard |
| ุ LCD-Defined Soft Keys |
| ุ 12-Inch High-Resolution (800 x 600) Color LCD for Information Display |
| ุ Spindle Speed Display and Feedrate Display |
| ุ Active Event and Subsequent Events Display |
| ุ Position Display with 8 Soft Key Selections of Part and Machine Coordinates |
| ุ Part Program Storage and Display, 448,000 Characters |
| ุ Buffered Input Allows Part Programs of Unlimited Length to be Executed from Floppy Disk, Hard Disk or from an External Source |
| ุ Concurrent Operation Allows Part Programs to be Entered or Edited While Cutting a Part |
| ุ Fault Messages and Program Text Messages |
| ุ Program Zero, Axis Home and Axis Jog |
| ุ Test Modes and Program Inhibit |
| ุ Optional Stop (M01) and Slash Code Block Delete |
| ุ On-Line Diagnostics |
| ุ Simultaneous Three (X, Y and Z) Axes of Control |
| ุ Departures to 999.9999 Inches, or 9999.999 mm |
| ุ Maximum Rapid Rates up to 1,200 IPM or 30 MPM |
| ุ Block Processing Time 3 ms. |
| ุ Electric Servo Drive Outputs 10V Analog |
| ุ Interface for Digital Feedback Encoders |
| ุ Servo Update Time 3 ms. |
| ุ Z-Axis Tracking Capability |
| ุ Slaved Z Axis Control Capability |
| ุ Spindle Speed Control: 5 Digits, 10 Volt Analog |
| ุ Spindle Orientation and Rigid Tapping Capability |
| ุ Fixed Software Travel Limits |
| ุ Part Programmable Software Travel Limits |
| ุ Customer Initialized Machine Control Parameters |
| ุ Auxiliary Functions: M, S, and T Codes |
| ุ 32 x 32 DC Inputs and Outputs plus 32 Row/Column Inputs for Operators Panel Switches |
| ุ PLC Programmable Logic Control with Flash Memory and Message Capability |
| ุ Automatic Tool Change Sequence including up to 5 Preset Axis Motions |
| ุ Random Tool Select |
| ุ Electronic Handwheel |
| ุ Part Program Storage Expansion to 896,000 Characters |
| ุ RS-422 Serial Port in Place of RS-232 Port |
| ุ DNC Terminal Mode |
| ุ High Speed Machining |
| ุ Tool Life Management |
| ุ Customer Prepared Cycles (User Macros) for Custom Cutting and Probing Cycles and for Special OEM-Designed Machine Functions |
| ุ High-Speed Touch Trigger Probe Functions for Part Location, Tool Setting and Compensations |
| ุ Interface for DynaPath Touch Trigger Probe Based, 3-D Off-line Digitizing System |
| ุ PrecisionScans Continuous Contact Scanning System for Reverse Engineering and Part Program Generation - Stand-Alone Version |
| ุ Simultaneous 4th through 8th Axis - Rotary or Linear |
| ุ Gantry Axis Control Capability |
| ุ Additional DC Inputs and Outputs |
| ุ Programming Format Switchable Between DynaPaths Menu-Driven Conversational and Conventional EIA/ISO G-Codes. |
| ุ Parameter Initialized G-Codes for Part Programming Compatibility between Machines |
| ุ Decimal Point Programming and Inch/Metric Input |
| ุ Cartesian/Polar Coordinate Programming |
| ุ Part Rotation: 0.001ก to 359.999ก |
| ุ Scale Factor: 0.0001 to 99.9999 |
| ุ Absolute/Incremental Programming for Dimensions, Scale Factor and Part Rotation |
| ุ Fixed Cycles for Conversational/EIA |
| ุ Advanced Calc-Assist Automatically Computes |
| ุ and Displays Coordinates and Intersection Points Between Complex Shapes Over Several Lines of Data |
| ุ Mirror Image |
| ุ Macro Programming Mode, 4 Levels |
| ุ Cavity Mill for Cutting Concave or Convex Circular and Rectangular Cavities |
| ุ Helical Interpolation |
| ุ High-Resolution Front-End Graphics Display for Display of the Programmed Path at Any Time While Writing or Editing a Part Program |
| ุ High-Resolution Interpolated Graphics Display to Verify Part Profile and Analyze Cutting Time Before Machining the Part |
| ุ Four-View Graphics with Simultaneous Display of XY, XZ, YZ Planes and Isometric View |
| ุ Conversational Graphics for Interactive Graphical Programming Help (Hard Disk Drive Optional Feature is a Prerequisite for Use of this Feature) |
|
|
|
ุ Modular Configuration: System Module CNC Operator's Panel Auxiliary Operator's Panel (Optional) |
|
ุ System Module Enclosure Hardened for Noise and Vibration Immunity |
|
ุ CNC Operator's Panel with Full-Travel Keyboard, Soft Keys and Industrial LCD - Oil and Coolant Tight |
|
ุ Industrial 586 Passive CPU Board for High Reliability |
|
ุ Processor Upgradable to Stay Current with Technology |
|
ุ High Speed, Serial CANbus Interface for Error Detecting/Correcting Packet Communication with CNC Operator's Panel and DC/IO |
|
ุ Machine Interface via Optically Isolated DC Inputs and Short Circuit Protected DC Outputs |
|
ุ Custom Heavy Duty Switching Power Supply . Input Voltage: 115/230 VACฑ 10% Single |
|
ุ Phase, 47-63 HZ, 425 VA . Ambient Temperature 40' to 120' (4' to 49'C) |
|
ุ Humidity: 5-95% |
|
ุ Mating Half of Interface Connectors and Front Panel Cables |
| Bi-directional Lead Screw Error Compensation |
| Reversal Error Compensation |
| Unidirectional Approach (UDA) |
| Part Offsets |
| (32) sets of Multi-Axis Fixture Offsets |
| (200) Cutter Diameter Compensations for Work Surface Programming |
| (200) Tool Length Compensations |
| Calibration Feature for Automatically Storing Tool Length Compensations and Fixture Offsets |
| Load and Store of all Tooling and Offset Tables |
| via Interface Ports and Optional Floppy Disk |
|
ุ 32-Bit 586 Processor with Cache Memory |
|
ุ Hard Disk Drive for Operating System Storage |
|
ุ Hard Disk Drive for Machine Control Parameters |
|
ุ Hard Disk Drive for Large Capacity Local Storage of Part Programs and Tool Tables and for Buffered Input Operations |
|
ุ 3.5 Inch IBMฎ AT Compatible Floppy Disk Drive with Cover and Cable for Load/Store of Part Programs, Tool Tables, Machine Parameters, PLC Program and System Upgrades and for Buffered Input Operations |
|
ุ . Dual RS-232 Serial Ports (300 to 38,400 Baud) for Load/Store of Part Programs, Tool Tables, Machine Parameters, PLC Program and for Buffered Input Operations |
|
ุ 32-Bit 586 Processor with Cache Memory |
|
ุ Hard Disk Drive for Operating System Storage |
|
ุ Hard Disk Drive for Machine Control Parameters |
|
ุ Hard Disk Drive for Large Capacity Local Storage of Part Programs and Tool Tables and for Buffered Input Operations |
|
ุ 3.5 Inch IBMฎ AT Compatible Floppy Disk Drive with Cover and Cable for Load/Store of Part Programs, Tool Tables, Machine Parameters, PLC Program and System Upgrades and for Buffered Input Operations |
|
ุ . Dual RS-232 Serial Ports (300 to 38,400 Baud) for Load/Store of Part Programs, Tool Tables, Machine Parameters, PLC Program and for Buffered Input Operations |
