| |
|
DynaPath 2000 Series Turning Controls
Conversational
graphics make it easy to program the DynaPath control. Just
identify the "Event Type" from the graphic representation and the
screen displays the information needed to create the program. You can also program
in EIA "G-Code" at the machine or use a program generated offline
DynaPath's lathe control puts a wide
variety of types of threading "Canned Cycles" at your disposal. This
makes it very easy to select the thread type needed and speed the time
to program.
Lathe operation requires detailed tool tables
for tool length, nose radius and orientation. DynaPath tables
are complete and can be updated manually or from a network PC.
|
Full-Travel Alphanumeric
Keyboard |
|
LCD-Defined Soft Keys |
|
12-Inch High-Resolution
(800 x 600) Color LCD for Information Display |
|
Position Display with
Soft Key Selections of Part and Machine Coordinates |
|
Active Event and
Subsequent Events Display |
|
Spindle Speed Display
and Feedrate Display |
|
Part Program Storage and
Display: 448,000 Characters |
|
Buffered Input Allows
Part Programs of Unlimited Length to be Executed from Floppy Disk or
from an External Source |
|
Concurrent Operation
Allows Part Programs to be Entered or Edited While Cutting a Part |
|
Fault Messages and
Program Text Messages |
|
Program Zero, Axis Home
and Axis Jog |
|
Retract and Recover
Feature to Simplify Tool Inspection and/or Tool insert Change |
|
Test Modes and Program
Inhibit Optional Stop (M01) and Slash Code Block Delete |
|
On-Line Diagnostics |
MACHINE
CONTROL CAPABILITIES
|
Simultaneous Two (X and
Z) Axes of Control |
|
Departures to ± 99.99999
Inches, or ± 9999.999mm (± 999.9999 Inches or ± |
|
9999.999mm optional) |
|
Maximum Rapid Rates up
to 1200 1PM or 30 MPM |
|
Block Processing Time 3
ms |
|
Electric Servo Drive
Outputs ± I OVA Max |
|
Interface for Digital
Feedback Encoders |
|
Servo Update Time 3 ms |
|
Interface for Two Manual
Handwheels |
|
Spindle Speed Control: 5
Digits, ± 10 Volt Analog |
|
Constant Surface Speed
Control |
|
Fixed Software Travel
Limits |
|
Part Programmable
Software Travel Limits |
|
Stored Safe Zones to
Protect Chuck and Talistock |
|
Customer Initialized
Machine Control Parameters |
|
Auxiliary Functions: M,
S, and T Codes |
|
32 x 32 DC Inputs and
Outputs pIus 32 Row/Column Inputs for Operators Panel Switches |
|
PLC Programmable Logic
Control with Flash Memory and Message Capability |
|
PART PROGRAMMING AIDS |
|
Programming Format
Switchable Between DynaPath® Menu-Driven Conversational and
Conventional EIA/ISO G-Codes |
|
Parameter Initialized
G-Codes for Part Programming Compatibility between different
Machines |
|
Decimal Point
Programming |
|
Inch/Metric input and
Mirror Image |
|
Absolute/Incremental
Programming |
|
Radius and Diameter
Programming |
|
Cartesian Coordinate
Programming |
|
End Point Programming |
|
Angle-Length Programming |
|
Angle-Diameter
Programming |
|
Angle-Radius Programming |
|
Automatic Fillet
Generation |
|
Automatic Chamfer
Generation |
|
Special Events |
|
Three Types of Taper
Programming |
|
Seven Types of Thread
Programming |
|
Three Types of Groove
Programming |
|
Peck Drill Cycle |
|
Tapping Cycle |
|
Roughing and Finishing
Cycles (Two Types to Accommodate both Bar Stock and Castings) to
Automatically Cut a Contour Defined by Turn, Face Taper and Arc
Events. Inside, Outside or Face Cycles can be Programmed. |
|
Entry of Speeds and
Feeds in Roughing and Finishing Cycles |
|
Material Data Table for
Standard and Special Materials Selected by Operator for Automatic |
|
Macro Programming Mode,
4 Levels |
|
High-Resolution
Interpolated Graphics Display to Verify Part Profile and Analyze
Cutting Time Before Turning the Part |
|
Conversational Graphics™
for Interactive Graphical Programming Help (The Hard Disk Drive
Optional Feature is a Prerequisite for Use of this Feature) |
|
PROCESSOR / MEMORY |
|
32-Bit 586 Processor
with Cache Memory |
|
Hard Disk Drive for
Operating System Storage |
|
Hard Disk Drive for
Machine Control Parameters |
|
Hard Disk Drive for
Large Capacity Local Storage of Part Programs and Tool Tables and
for Buffered Input Operations |
|
3.5 Inch IBM® AT
Compatible Floppy Disk Drive with Cover and Cable for Load/Store of
Part Programs, Tool Tables, Machine Parameters, PLC Program and
System Upgrades and for Buffered Input Operations |
|
Dual RS-232 Serial Ports
(300 to 38,400 Baud) for Load/Store of Part Programs, Tool Tables,
Machine Parameters, PLC Program and for Buffered Input Operations |
|
COMPENSATIONS |
|
Bi-directional Lead
Screw Error Compensation |
|
Reversal Error
Compensation |
|
48) Pairs of Tool
Offsets (X, Z) Entered as Radius or Diameter and Absolute or
Incremental |
|
(16) Sets of Tool
Geometry Compensation (Tool Size and Tool Nose Radius) with Look
Ahead Capability for Work Surface Programming |
|
(48) Stored Feedrate
Override Values which can be Incremented and Decremented in 5% Steps
during Cutting |
|
Calibration Feature for
Automatically Storing Tool Compensations |
|
Load and Store of all
Tool Table Data via Interface Ports and Optional Floppy Disk |
|
OPERATING MODES |
|
Jog Mode: |
|
Continuous Jog: 4
Selectable Rates |
|
Incremental Jog,:
5 Selectable Increments |
|
Reference Zero |
|
Auto Mode |
|
Single Event Mode |
|
Program Mode: |
|
Position
Finishing Turn |
|
Face M
Function Taper Repeat |
|
Arc Macro
Groove Text |
|
Thread EIA
Drill/Tap Set-Up |
|
Roughing Optimized
Metal Removal |
|
Set Up Mode: |
|
Safe Zones In/mm
Selection |
|
Reversal Travel
Limits |
|
Comp. Test Modes |
|
Program Home
Position Entry |
|
Allow/Inhibit
Feedrate Override |
|
Maximum Select
Mirror Image |
|
Spindle RPM
Material Data Table |
|
Tool Tables: |
|
Tool Offsets |
|
Tool Radius
Compensations |
|
Stored Feedrate
Overrides |
|
Transmit/Receive Mode |
|
Learn Mode |
|
Catalog Mode with
Capability to Store, Copy and Rename up to 250 Part Programs |
|
OPTIONAL FEATURES |
|
Electronic Handwheel(s) |
|
Part Program Storage
Expansion to 896,000 Characters |
|
RS-422 Serial Port in
Place of RS-232 Port |
|
DNC Terminal Mode |
|
Customer Prepared Cycles
(User Macros) for Custom Culling and Probing Cycles and for Special
OEM-Designed Machine Functions |
|
High-Speed Touch Trigger
Probe Interface |
|
Additional DC Inputs and
Outputs |
|
MECHANICAL / ELECTRICAL |
|
Modular Configuration: |
|
System Module |
|
CNC Operators Panel |
|
Auxiliary Operator’s Panel (Optional) |
|
System Module Enclosure Hardened for Noise and Vibration Immunity |
|
CNC Operator’s Panel with Full-Travel Keyboard, Soft Keys and
Industrial LCD - Oil and Coolant Tight |
|
Industrial 586 Passive
CPU Board for High Reliability |
|
Processor Upgradeable to
Stay Current with Technology |
|
High Speed, Serial
CANbus Interface for Error Detecting/Correcting Packet Communication
with CNC Operator’s Panel and DC/IO |
|
Machine Interface via
Optically Isolated DC Inputs and Short Circuit Protected DC Outputs |
|
Custom Heavy Duty
Switching Power Supply |
|
Input Voltage: I15/230
VAC + 10% Single Phase, 47-63 HZ, 425 VA |
|
Ambient Temperature 40°
to I20° (4° to 49°C) |
|
Humidity: 5-95% |
|
Mating Half of Interface
Connectors and Front Panel Cables |
|
|
